Props painted 3,60m
Description:
Props painted 3,60mConstruction props made of steel painted with a red dipping bath.
Decoupling system - this enables quick dismantling of the prop with little effort
Foot reinforcement - by mounting a stronger tube near the foot plate
By drilling holes every 100 mm in the inner tube, the extension length varies from 50 to 500 cm
Compatible with most of the accessories of other formworks
Technical data:
Inner and outer pipe in steel S235JR according to standard UNI EN 10219-1 / 2
hidden thread, step 8 mm, to adjust the length
threaded pins directly on the outer tube, or welded, made by rolling, so without removing the material
Lower plate available in flat or curved version
Upper plate available in three versions (flat plate, with fixed cross or "U" shaped)
High resistance safety hook for fastening between inner and outer tube
Hand squeeze safety device for safe conditions when working
Production standards: D.P.R. 164/56 ART. 7 - UNI EN 729-2:1996.
Load capacity: 9,14kN at full extension length of 3,60m
inner tube diameter: 48,30mm
Outer tube diameter: 56,00mm
1 package of 50 pieces
19/09/2023 - 09:13 |
User #102424
|
105717 views
I offer
Austria
0 saved PropsGBM
Tipologia
Props
Marca
GBM
Contact the advertiser
Would you like to respond to this advertisement? It's free and all it takes is an email:
Related announcements
DOKA EUREX TOP 350
Lot of very rarely used DOKA EUREX TOP 350 props in original 40-piece containers.
|
Roberto (#1003)
| Italy | 86831 views
0 saved
More ads from this advertiser
Universal formwork PASCHAL Raster
Universal formwork PASCHAL Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), GaLa construction, precast elements. Versatile and flexible use as manual and large-area formwork. Due to the...
|
User #102424
| Austria | 62272 views
0 saved
DOKA EUREX 30-400 ECO, used
320x DOKA EUREX 30-400eco, used. DOKA construction prop made of steel. - Effortless loosening of the adjusting nut due to special thread geometry - Less effort required due to low weight - Safe to use thanks to consistently high load-...
|
User #102424
| Austria | 104971 views
1 saved
H16 Formwork timber
H16 Formwork timber Height 16cm, Wide 65mm, Weight 3,3kg/meter Timber formwork beams The tried-and-tested components for many formwork systems. Timber formwork beams are the basis for many formwork systems and have a wide range ...
|
User #102424
| Austria | 195456 views
1 saved
Doka Frami framed formwork 355 m2
Light and manhandled steel-framed DOKA formwork for foundations, walls and columns The lightweight DOKA Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly...
|
User #102424
| Austria | 147484 views
0 saved
Props 20-300 2SP, new
Props 20-300 2SP, new Low dead weight allows a fast workflow an conserves energy. Prop retains its value for many years thanks to high-quality production and galvanisation. Optimised thread pitch allows for quick and safe release of fixe...
|
User #102424
| Austria | 172413 views
0 saved
Meva Alustar 435m2
Meva Alustar 435m2 The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and comme...
|
User #102424
| Austria | 138850 views
0 saved
Extension for beam forming support 60cm – galvanized
Extension for beam forming support 60cm – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 60cm 4,4 kg
|
User #102424
| Austria | 209764 views
0 saved
Forming support 20 – galvanized
Forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6,9 kg
|
User #102424
| Austria | 207152 views
0 saved
NOE Alu L
NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently producti...
|
User #102424
| Austria | 139878 views
1 saved
Peri Trio 552m²
Peri Trio 552m² Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight. - The only necessary connecting part f...
|
User #102424
| Austria | 133061 views
0 saved
Vedi tutti gli annunci di User #102424
Want to respond to these ads? Save them as favorites? It's free and all it takes is an email: